Barron Heating AC Electrical & Plumbing Blog: Archive for the ‘Cascade Natural Gas’ Category

Is Your Home A/C Ready?

Wednesday, May 27th, 2015

Wes Diskin performing a Home Performance Assessment

The first step in purchasing an Air Conditioner

Before you buy an Air Conditioning Unit, you’ll want to be sure the cool air you’re paying for is not being lost through faulty ducts, home air leakage, and poor insulation. There is a lot a green air conditioning contractor can do to get your home A/C ready!

Now, adding air conditioning CAN be as simple as calling the HVAC company to install a unit. But, as with all things HVAC, the most simplistic answer is not the smartest answer in the long-run. Having diagnostic tests run on your home (or a home performance test) is the only way to know the condition of the home and therefore the only way to install the most cost-effective, comfortable, energy efficient, and healthy air conditioning possible.

Here’s a sample run-through of what you should expect before an A/C install. Be sure to choose a Heating & Cooling company that has a thoroughly trained Home Performance team.

Assess the Current Situation: Furnace, Fuel, Investment

The first thing that should happen is to look at the heat delivery system currently in place. If the furnace and ducting system test well and are in good shape, it’s possible to use the ducting that’s already there. If not, ductless may very well be the way to go. Ductless also offers the option of zonal A/C, which can be handy for certain homes.

Next, it’s important to think about the fuel type. Folks who have natural gas as their heating fuel can pretty easily add an A/C unit to the existing system (if it tests well) and go with a less expensive installation cost. However, if a homeowner is using a more expensive heating fuel like electric, propane, or oil, it probably makes more sense to convert the whole system to a forced-air or ductless heat pump (which both include A/C) because the efficiency of the heat pump technology will allow that new system to pay for itself rapidly.

Diagnostics are Key

A Blower-Door Test is the key to understanding air flow patterns and problems. What is the heat gain in the home?

To be truly A/C-ready, you’ll want a trained Home Performance Technician (all estimators at Barron can do this) to run diagnostics on your house. They will use a blower-door, an infrared camera, a smoke-puffer, and/or other devices as needed to test the air flow and leakages in your home. There are a lot of questions to answer, such as:

  • What is the heat gain in the home?
  • Where does the sun come in, which direction is the home oriented, what kind of windows are in place?
  • What is the condition of the attic?
  • How much and in what rooms are there air leakage problems?
  • Can the ducts be used effectively (are they leaky?)
  • How much insulation is in the attic, crawl space, and walls?

Without first answering these questions (and taking action to address them), there is no way to ensure you’re dollars spent on conditioned air are being spent effectively. Attic insulation is especially important, as attic temperatures can run very high, making it harder for your A/C unit to do it’s job. If you’re using ducts to deliver your A/C, having them sealed tightly is also a pretty huge deal. Because duct-work is pressurized, leaky ducts can lose massive amounts of conditioned air; not to mention leaky ducts can carry in a bevy of nasty particulates from your insulation or dirty crawl space. A knowledgeable HVAC contractor will be able to apply the principles of building science to your specific home, to get a whole-house perspective.

The Benefits of A/C Readiness

Taking the time to truly be A/C Ready has the obvious benefit of getting the most bang for your buck, but it can be nice to see all the ways and angles that your home, health, and pocketbook will benefit from looking at the big picture. Having your home tested (with Home Performance) and analyzed for A/C Readiness in the end will mean:

  • You’re investing in a permanent and lasting change in your whole home, and not just adding an A/C unit that is more or less only a temporary fix (depending on the state of your home).
  • Any energy upgrades you make will prolong the life of the A/C unit, since it won’t have to work as hard, and there will be less repairs.
  • Big changes to the building envelope and energy upgrades can help when you decide to sell your home.
  • The equipment chosen is guaranteed to be properly sized for your particular home and cooling needs. Detailed diagnostics give us all the clues to choose the best possible system with dialed-in performance.
  • The air you breathe will be cleaner and healthier, which can often relieve certain types of medical symptoms suffered by you and your family.
  • You will be assisting the planet by creating a more energy efficient home!

Continue Reading

Understanding Efficiency Ratings of Furnaces

Thursday, July 18th, 2013

A central furnace or boiler’s efficiency is measured by annual fuel utilization efficiency (AFUE). The Federal Trade Commission requires new furnaces or boilers to display their AFUE so consumers can compare heating efficiencies of various models. AFUE is a measure of how efficient the appliance is in the energy in its fuel over the course of a typical year.

Specifically, AFUE is the ratio of heat output of the furnace or boiler compared to the total energy consumed by a furnace or boiler. An AFUE of 90% means that 90% of the energy in the fuel becomes heat for the home and the other 10% escapes up the chimney and elsewhere. AFUE doesn’t include the heat losses of the duct system or piping, which can be as much as 35% of the energy for output of the furnace when ducts are located in the attic.

An all-electric furnace or boiler has no flue loss through a chimney. The AFUE rating for an all-electric furnace or boiler is between 95% and 100%. The lower values are for units installed outdoors because they have greater jacket heat loss. However, despite their high efficiency, the higher cost of electricity in most parts of the country makes all-electric furnaces or boilers an uneconomic choice. If you are interested in electric heating, consider installing a heat pump system.

The minimum allowed AFUE rating for a non-condensing fossil-fueled, warm-air furnace is 78%; the minimum rating for a fossil-fueled boiler is 80%; and the minimum rating for a gas-fueled steam boiler is 75%. A condensing furnace or boiler condenses the water vapor produced in the combustion process and uses the heat from this condensation. The AFUE rating for a condensing unit can be much higher (by more than 10 percentage points) than a non-condensing furnace. Although condensing units cost more than non-condensing units, the condensing unit can save you money in fuel costs over the 15- to 20-year life of the unit, and is a particularly wise investment in cold climates.

You can identify and compare a system’s efficiency by not only its AFUE but also by its equipment features, listed below.

Old, low-efficiency heating systems:

  • Natural draft that creates a flow of combustion gases
  • Continuous pilot light
  • Heavy heat exchanger
  • 68%–72% AFUE

Mid-efficiency heating systems:

  • Exhaust fan controls the flow of combustion air and combustion gases more precisely
  • Electronic ignition (no pilot light)
  • Compact size and lighter weight to reduce cycling losses
  • Small-diameter flue pipe
  • 80%–83% AFUE

High-efficiency heating systems:

  • Condensing flue gases in a second heat exchanger for extra efficiency
  • Sealed combustion
  • 90%–97% AFUE

Posted by Wes Diskin

Continue Reading

Understanding Efficiency Ratings of Furnaces

Thursday, March 21st, 2013

A central furnace or boiler’s efficiency is measured by annual fuel utilization efficiency (AFUE). The Federal Trade Commission requires new furnaces or boilers to display their AFUE so consumers can compare heating efficiencies of various models. AFUE is a measure of how efficient the appliance is in the energy in its fuel over the course of a typical year.

Specifically, AFUE is the ratio of heat output of the furnace or boiler compared to the total energy consumed by a furnace or boiler. An AFUE of 90% means that 90% of the energy in the fuel becomes heat for the home and the other 10% escapes up the chimney and elsewhere. AFUE doesn’t include the heat losses of the duct system or piping, which can be as much as 35% of the energy for output of the furnace when ducts are located in the attic.

An all-electric furnace or boiler has no flue loss through a chimney. The AFUE rating for an all-electric furnace or boiler is between 95% and 100%. The lower values are for units installed outdoors because they have greater jacket heat loss. However, despite their high efficiency, the higher cost of electricity in most parts of the country makes all-electric furnaces or boilers an uneconomic choice. If you are interested in electric heating, consider installing a heat pump system.

The minimum allowed AFUE rating for a non-condensing fossil-fueled, warm-air furnace is 78%; the minimum rating for a fossil-fueled boiler is 80%; and the minimum rating for a gas-fueled steam boiler is 75%. A condensing furnace or boiler condenses the water vapor produced in the combustion process and uses the heat from this condensation. The AFUE rating for a condensing unit can be much higher (by more than 10 percentage points) than a non-condensing furnace. Although condensing units cost more than non-condensing units, the condensing unit can save you money in fuel costs over the 15- to 20-year life of the unit, and is a particularly wise investment in cold climates.

You can identify and compare a system’s efficiency by not only its AFUE but also by its equipment features, listed below.

Old, low-efficiency heating systems:

  • Natural draft that creates a flow of combustion gases
  • Continuous pilot light
  • Heavy heat exchanger
  • 68%–72% AFUE

Mid-efficiency heating systems:

  • Exhaust fan controls the flow of combustion air and combustion gases more precisely
  • Electronic ignition (no pilot light)
  • Compact size and lighter weight to reduce cycling losses
  • Small-diameter flue pipe
  • 80%–83% AFUE

High-efficiency heating systems:

  • Condensing flue gases in a second heat exchanger for extra efficiency
  • Sealed combustion
  • 90%–97% AFUE

Posted by Wes Diskin

Continue Reading